my invisible text
Categories
  • TIMELINE

JV3 blown slider board?

<<

User avatar

Premium Member
Premium Member

Posts: 1267

Joined: Thu Mar 06, 2008 12:17 am





Post Fri Dec 13, 2013 9:06 am

JV3 blown slider board?

Hi,

yesterday half of my nozzle check on the magenta head in my Mimaki JV3 dissapeared completely.
I left the heads soaking overnight and same result this morning.

Am I correct in thinking the slider board has blown?


Thanks

John
<<

User avatar

3 Star Contributor

Posts: 243

Joined: Wed Oct 10, 2001 1:00 am





Post Fri Dec 13, 2013 9:21 am

Have you checked that one of the carts isn't empty? Iv'e pushed it forward before +30 and its already been pushed before and the ink ran out
<<

User avatar

Premium Member
Premium Member

Posts: 1267

Joined: Thu Mar 06, 2008 12:17 am





Post Fri Dec 13, 2013 1:21 pm

after a bit of investigation there was an air bubble in the line..........ink fill moved it and test print is perfect again :D

Happy not to have needed to buy a slider board!

John
<<

User avatar

TRADE SUPPLIER

Posts: 1338

Joined: Wed May 12, 2010 5:44 pm

Country: United Kingdom (uk)




Post Fri Dec 13, 2013 5:32 pm

In my experience, when a slider board goes, it affects both of the same colour (i.e both magentas would either not fire at all or fire all the time) rather than just one side.

Glad you sorted it out anyway.

Stafford

Return to Mimaki Printers



Who is online

Registered users:
No registered users

 

Who is Online

In total there are 44 users online ::
1 registered, 0 hidden and 43 guests
[based on past 5 minutes]

Most users ever online was
808 on Sun May 03, 2020 6:49 pm

Registered users:
No registered users

Copyright © 2000 - 2020 Robert Lambie