my invisible text
Categories
  • TIMELINE

Outputting to Graphtec ce-5000-120 via Flexi sign 7.5

<<

User avatar

Posts: 3

Joined: Tue Nov 04, 2003 2:09 pm





Post Wed Nov 05, 2008 4:22 pm

Outputting to Graphtec ce-5000-120 via Flexi sign 7.5

I'm running flexi 7.5v2 and I just bought a Graphtec Ce-5000-120, however I cant seem to output to the plotter since when I add a device, the 5000 isnt listed. Can anyone help me here? Have a driver I can use? I called Flexi and they want me to upgrade, which is impossible. Cant afford that right now. Any help would be greatly appreciated. That robo software is for the birds. HELP!

Thanks my friends
mod-edit please read board rules
<<

User avatar

5 Star Contributor

Posts: 2452

Joined: Mon Jan 07, 2002 1:00 am





Post Wed Nov 05, 2008 5:00 pm

Should work with any CE Series driver. CE1000, CE2000 etc.

Or a GPGL driver, you will need to make sure the plotter is set to GPGL rather than HPGL if you choose this method.
<<

User avatar

Posts: 3

Joined: Tue Nov 04, 2003 2:09 pm





Post Wed Nov 05, 2008 5:22 pm

thanks Brian, but still no luck,

should that work with the usb connection and/or serial.

I have never had so much difficutiesl

sean
<<

User avatar

5 Star Contributor

Posts: 2452

Joined: Mon Jan 07, 2002 1:00 am





Post Wed Nov 05, 2008 7:24 pm

Sorry I am not familiar with Flexi. I would imagine it would be easier to set up via serial if you have the correct cable?

Return to Graphtec Cutters



 

About
Contact
Board Rules
Membership
Terms & Conditions

 

Signapp - iPhone & iPad
Signapp - Android
Vehicle Wrap Training
Vinyl Application Training
Vehicle Wrap Accreditation
UK Sign Group
Site Membership
Advertising
Videos
ISA-UK

 

 

Who is Online

In total there are 72 users online ::
5 registered, 0 hidden and 67 guests
[based on past 5 minutes]

Most users ever online was
370 on Tue Aug 28, 2018 5:02 pm

Registered users:
Alex Crosbie, Billy Higgins, Robert Lambie

Copyright © 2000 - 2019 Robert Lambie