my invisible text
Categories
  • TIMELINE

HP Latex 360 printer- print start point

<<

steve foggon

User avatar

Posts: 4

Joined: Wed Mar 06, 2019 6:18 pm

Country: United Kingdom (uk)




Post Thu Mar 07, 2019 9:48 am

HP Latex 360 printer- print start point

Hi, Ive been in the sign industry 15 years and only just joined this forum so big hello to everyone.
I do have an issue that prompted my interest ill be honest! But I will always try and help others out if I can now i'm here.
Hope this is the correct way of going about the above printer, so here goes.
When printing, we normally use a 1370 mm roll and the printer is capable of printing almost edge to edge, so a 1220 mm print should be achievable but we are only getting about 1180mm with print due to the printer starting some 150 mm in!
I cannot fathom how to change this, ive tried centring, starting from the left, starting from the right, nudging the roll along on the spooler, every time it will start 150 mm in. Cant find anything relating to borders etc.
Can anyone please help, im running Onyx 11 if it helps? No help from them as yet.
Attached is an image of what happens, in this case the red starting from the left side, under the green started from the right?

UPDATE Hmm think ive sorted it now, was in the printer panel itself in settings :smiles:
Attachments
20190307_083814.jpg
Last edited by steve foggon on Thu Mar 07, 2019 11:52 am, edited 1 time in total.
<<

Colin Crabb

5 Star Contributor

Posts: 535

Joined: Tue Feb 14, 2012 4:50 pm





Post Thu Mar 07, 2019 11:45 am

Re: HP Latex 360 printer- print start point

On printer:

setting - substance - substance handling - right hand edge (check what's been put into this box).

In Onyx:

Placement - general (check on offset has been entered & justification is centre).
<<

steve foggon

User avatar

Posts: 4

Joined: Wed Mar 06, 2019 6:18 pm

Country: United Kingdom (uk)




Post Thu Mar 07, 2019 11:55 am

Re: HP Latex 360 printer- print start point

Colin Crabb wrote:On printer:

setting - substance - substance handling - right hand edge (check what's been put into this box).

In Onyx:

Placement - general (check on offset has been entered & justification is centre).


Thanks Colin, pretty much what ive fumbled my way around to doing - all be it a strange combination of things between the printer itself and Onyx but im happy its working now. Appreciate the help :thumbsup:
<<

Colin Crabb

5 Star Contributor

Posts: 535

Joined: Tue Feb 14, 2012 4:50 pm





Post Sat Mar 09, 2019 10:21 am

Re: HP Latex 360 printer- print start point

hehe no worries - I loooove our 360's / Onyx combo, but yes at times there is a few oddities!

Feel free to ask me anytime if you have any issues, we know our way around this kit well :smiles:

Return to Vehicle Wrapping



Who is online

Registered users:
No registered users

 

About
Contact
Board Rules
Membership
Terms & Conditions

 

Signapp - iPhone & iPad
Signapp - Android
Vehicle Wrap Training
Vinyl Application Training
Vehicle Wrap Accreditation
UK Sign Group
Site Membership
Advertising
Videos
British Signs & Graphics Assoc.

 

 Facebook
 Twitter
 Youtube
 Linkedin

 

Who is Online

In total there are 70 users online ::
2 registered, 0 hidden and 68 guests
[based on past 5 minutes]

Most users ever online was
370 on Tue Aug 28, 2018 5:02 pm

Registered users:
No registered users

Copyright © 2000 - 2019 Robert Lambie