my invisible text
Categories
  • TIMELINE

Registration marks

<<

User avatar

2 Star Contributor

Posts: 122

Joined: Thu Feb 12, 2015 2:44 am

Country: United Kingdom (uk)




Post Wed Oct 28, 2015 1:59 am

Registration marks

Hi Guys,

Might sound crazy but today i could not get the printer to read the third registration mark on my Roland vs640i.
It reads the first two points but once it travels to the back to read the third it looks as if it don't travel far enough back to reach the third registration mark (1cm out ish). It was a small print - laminate - cut job. Sheet size 1.5m x 1m.

Any input would help before i go bold.

Thanks 8).
Tas
<<

User avatar

Premium Member
Premium Member

Posts: 1020

Joined: Tue Mar 21, 2006 6:21 pm





Post Wed Oct 28, 2015 12:05 pm

Re: Registration marks

Check you are sending the right job again. We have made that mistake.
<<

User avatar

3 Star Contributor

Posts: 243

Joined: Wed Oct 10, 2001 1:00 am





Post Wed Oct 28, 2015 1:42 pm

Re: Registration marks

Do you have enough extra vinyl at the back? if not then the sensor at the back of the cutter will think its the end of the roll..if so, add a few inches to the end.

If you have enough vinyl at the back then it could be your alignment when placing the material in the machine. when making the reg marks, make them bigger for longer prints and try not to make cut & prints too long.

Hope it helps
<<

User avatar

2 Star Contributor

Posts: 122

Joined: Thu Feb 12, 2015 2:44 am

Country: United Kingdom (uk)




Post Thu Oct 29, 2015 12:02 am

Re: Registration marks

Thanks for the tips guys and for taking the time to reply 8). In the end the actual issue was me pressing get paper width before starting the cutting. Good few metres of the good stuff in the bin 8(. Live and learn.

Return to Roland Printers



Who is online

Registered users:
No registered users

 

Who is Online

In total there are 44 users online ::
1 registered, 0 hidden and 43 guests
[based on past 5 minutes]

Most users ever online was
808 on Sun May 03, 2020 6:49 pm

Registered users:
No registered users

Copyright © 2000 - 2020 Robert Lambie