my invisible text
Categories
  • TIMELINE

backing coming loose

<<

Michiel

User avatar

1 Star Contributor

Posts: 13

Joined: Wed Jan 02, 2013 12:27 pm





Post Tue Aug 20, 2013 12:40 pm

backing coming loose

Hi all,

Question: I did a multi-layer job, consisting of shapes with text (stencil font)
Shipped it out, He got back to me with a complaint about the backing.

Taking the shapes of the backing was no problem, but with the text he experienced that the cut was apparantly to deep causing the backing to come loose.
I hope my explanantion makes sense.

I wonder if anyone recognizes this.
It looks like the knife cut deeper into the text part.
Same vinyl/knife/settings.
<<

John Harding

User avatar

5 Star Contributor

Posts: 2876

Joined: Wed Jul 30, 2003 7:08 pm





Post Tue Aug 20, 2013 1:06 pm

probably you used two different vinyls one thinner than the other hence with the same pressure settings its possible for the cutter to go through the backing of one product and not the other :(

John
<<
User avatar

Premium Member
Premium Member

Posts: 2904

Joined: Mon Dec 11, 2006 3:47 pm





Post Tue Aug 20, 2013 1:50 pm

check with supplier that all colours are the same thickness. Some black and whites can be thinner I was led to believe
<<

Michiel

User avatar

1 Star Contributor

Posts: 13

Joined: Wed Jan 02, 2013 12:27 pm





Post Tue Aug 20, 2013 1:51 pm

That's what bothers me. It's the same!
<<

Reza Faezi

3 Star Contributor

Posts: 212

Joined: Fri Jun 24, 2011 11:31 am





Post Tue Aug 20, 2013 2:11 pm

It sounds silly, but maybe you have a double cut path on the text part of your file
<<

Nigel Pugh

User avatar

Trade Supplier
Trade Supplier

Posts: 941

Joined: Wed Jul 09, 2003 11:01 am





Post Tue Aug 20, 2013 2:39 pm

Do a test cut across the full width of your cutter, perhaps the cutting strip is damaged or seated higher along the part of the width and so reducing distance between vinyl and blade.

Nigel
<<

Michiel

User avatar

1 Star Contributor

Posts: 13

Joined: Wed Jan 02, 2013 12:27 pm





Post Tue Aug 20, 2013 3:16 pm

Reza Faezi wrote:It sounds silly, but maybe you have a double cut path on the text part of your file


Good one, I know I do a lot of duplicating in inkscape.
I'll check my design for hidden duplicates.
<<

Michiel

User avatar

1 Star Contributor

Posts: 13

Joined: Wed Jan 02, 2013 12:27 pm





Post Tue Aug 20, 2013 4:00 pm

Nigel Pugh wrote:Do a test cut across the full width of your cutter, perhaps the cutting strip is damaged or seated higher along the part of the width and so reducing distance between vinyl and blade.

Nigel


I'll try that too.
Checked design: No duplicates!
<<
User avatar

Premium Member
Premium Member

Posts: 2904

Joined: Mon Dec 11, 2006 3:47 pm





Post Tue Aug 20, 2013 4:12 pm

what vinyl are you using?
<<

Harry Cleary

User avatar

5 Star Contributor

Posts: 7257

Joined: Fri Jul 15, 2005 11:32 pm





Post Tue Aug 20, 2013 4:28 pm

Cutting Master has a check box where you can ask it to cut 'twice', if using CM have you checked this? if you use that function you have to remember to uncheck it, It doesn't go back to the default setting until you exit the programme iirc.
<<

Neil Davey

User avatar

L-Gold Member
L-Gold Member

Posts: 2521

Joined: Tue Aug 26, 2003 8:58 pm





Post Wed Aug 21, 2013 7:39 am

I think it's probably just a case of the pressure being a little too high.
The shapes would probably come off the backing OK depending on the shape but the lettering would be more likely to pull up the backing especially if the vinyl has got damp at any time.
<<

Denise Goodfellow

User avatar

L-Gold Member
L-Gold Member

Posts: 1174

Joined: Wed Sep 16, 2009 7:59 pm





Post Wed Aug 21, 2013 6:08 pm

Did the text have built up layers?
Did you do it wet?

Sometimes the app fluid soaks into the cut line, we transfer all the design onto uncut backing paper from old stock vinyl.

Did it lift ok when you applied app paper?

Return to Vinyl



Who is online

Registered users:
No registered users

cron

 

About
Contact
Board Rules
Membership
Terms & Conditions

 

Signapp - iPhone & iPad
Signapp - Android
Vehicle Wrap Training
Vinyl Application Training
Vehicle Wrap Accreditation
UK Sign Group
Site Membership
Advertising
Videos
British Signs & Graphics Assoc.

 

 Facebook
 Twitter
 Youtube
 Linkedin

 

Who is Online

In total there are 61 users online ::
3 registered, 0 hidden and 58 guests
[based on past 5 minutes]

Most users ever online was
370 on Tue Aug 28, 2018 5:02 pm

Registered users:
No registered users

Copyright © 2000 - 2019 Robert Lambie