my invisible text
Categories
  • TIMELINE

vehicle graphics: capitol paving

<<

Alan

4 Star Contributor

Posts: 349

Joined: Wed Jul 31, 2002 11:26 pm





Post Sat May 31, 2003 12:55 pm

vehicle graphics: capitol paving

Just the application this morning.

The chap was vectorised from a crap piece of clipart supplied and the mini digger from a photograph off the web. A little bit of airbrushing on the lettering, mainly because I can and others can’t/don’t, and the customer goes away with a smile from ear to ear.

The job may not be that special, but a smiling customer defiantly is. :wink:
Attachments
capital_montage.jpg
Capital montage
capital_montage.jpg (83.65 KiB) Viewed 1332 times
<<

Simon Clayton

5 Star Contributor

Posts: 1057

Joined: Fri Aug 30, 2002 10:56 am





Post Sat May 31, 2003 1:18 pm

Alan, great stuff,
Love the lettering
Simon
<<

Gray.Hodge

5 Star Contributor

Posts: 1258

Joined: Tue Mar 05, 2002 1:00 am





Post Sat May 31, 2003 1:37 pm

Alan, what a difference that little extra work with the airbrush makes! Now I feel all guilty for not getting the airbrush out enough myself.

What paint did you use?

How long did that part of the job take?

How did you calculate the radius of the lettering for the from of the vehicle? that's something I have trouble with. I usually guess it, then draw a paper pattern first to see if I guessed right. :oops:
<<

Alan

4 Star Contributor

Posts: 349

Joined: Wed Jul 31, 2002 11:26 pm





Post Sat May 31, 2003 4:54 pm

I doubt if I’m going to be a much use to you on the paint Graham because I use Halfords car touch-up paint. This is there own brand and comes in silver/grey rattle cans. I’ve tried other brands but this is the one I trust. It passes my simple test i.e. spray paint straight from can onto a piece of vinyl, leave to dry half an hour, stick a piece of vinyl onto the surface of the paint and snatch it off. If the paint stays put you’re on a winner.

I don’t use the paint straight from the can for this type of work of cause. And the vinyl always gets a wipe over with isopropyl alcohol before spraying, but NO scuffing.
I spray the paint into a small cup and then pour it into the airbrush. Once the paint is dry I go over it with a soft cloth to remove any over-spray dust. If the feathered edge of the paint still looks very dusty from over-spray I spray it over with clean cellulose thinners to wet it up so it flows out.
Finish off with one or two coats of frog.

I have used Deka sign air water based paints but they can clog the brush up a little. Cellulose, or whatever it is they use nowadays in these cans, works great every time.

If you go for a touch-up paint, test first. I have found some brands to be useless at sticking to vinyl.

Time: probably around an hour and a half, two colours, two frog juice and cleaning the brush etc.

The radius was not that critical. I pulled a picture of the van bonnet into CorelDraw and made an ellipse that took the line I roughly wanted and then set the text to that.

I don’t bother with vehicle outlines. I use the digital camera. Stand well back and zoom in to lessen any distortion and then take one or two long measurements (seem to seem or whatever). Scale up on the computer and put the graphics straight on the actual vehicle. Once printed you have one very impressed customer. One customer’s wife actually wanted to pay me because she thought I’d done the van and photographed it. :D

Most of the above’s not for your benefit Graham (sucking eggs and all that) but others may want to know.
<<

Michael.

5 Star Contributor

Posts: 1213

Joined: Wed Nov 21, 2001 1:00 am





Post Sat May 31, 2003 8:54 pm

...well not only am I impressed with the job Alan - but I read and took onboard what you said about certain paints and the process...rest assured it'll get used in future!

thank you! :wink:

more soon

mike
<<

Phill Fenton

User avatar

Premium Member
Premium Member

Posts: 11084

Joined: Tue Apr 30, 2002 11:04 pm





Post Sat May 31, 2003 11:07 pm

Beautiful work Alan. Please expalin more how this effect is achieved. I'm guessing you used a white paint in the airbrush to create the highlights. Did you create lowlights also using dark paint or is this my imagination. I presume this is all done prior to weeding the cut lettering and putting it all together on the van or is it?

This would make a wonderful step by step. :D
<<

Lee Attewell

User avatar

5 Star Contributor

Posts: 954

Joined: Tue Oct 01, 2002 4:02 am





Post Fri Jun 06, 2003 2:19 am

i'm with Phil...Step by step..Step by step...Step by step..."chanting".

Looks really good.
<<

Alan

4 Star Contributor

Posts: 349

Joined: Wed Jul 31, 2002 11:26 pm





Post Fri Jun 06, 2003 10:30 am

I’ll see if I can put something together for a step by step this next week.

Return to Gallery



 

About
Contact
Board Rules
Membership
Terms & Conditions

 

Signapp - iPhone & iPad
Signapp - Android
Vehicle Wrap Training
Vinyl Application Training
Vehicle Wrap Accreditation
UK Sign Group
Site Membership
Advertising
Videos
British Signs & Graphics Assoc.

 

 Facebook
 Twitter
 Youtube
 Linkedin

 

Who is Online

In total there are 73 users online ::
4 registered, 0 hidden and 69 guests
[based on past 5 minutes]

Most users ever online was
370 on Tue Aug 28, 2018 5:02 pm

Registered users:
Chris Wilson, Simon Worrall

Copyright © 2000 - 2019 Robert Lambie